Rittal enclosures use this unit to further transmit alarm signal status signals and detection values or realize remote control of Rittal cabinets through relay output modules-rittal Rittal electrical cabinets Rittal fans Rittal PDU Rittal busbars
Source: edited by this website
Author:stationmaster
2/27/2024
140
input/output unit
Rittal cabinet use this unit to further transmit alarm signals, status signals and detection values or achieve remote control through relay output modules.Rittal electric cabinet input/output unit has 4 universal input and output ports. It drives the sensors/actuators listed.
The Rittal enclosures application network interface is carried out through the PUI (Processing Unit), which is always required for the system driver.
Control keys are used to identify and set the Rittal Air Conditioner sensor/actuator unit. The LED alarm display is used to indicate alarm or
Setting changes
Fixed installation of DK7320.440 or DK7320.450
5RJ45, connected via connecting cable DK7320.470
On PUlDK7320.100 (this unit can also be powered via this connection)
Security system sensor unit
access unit
This Rittal enclosures sensor unit can be used to control one or two door systems via the network so that they can be opened automatically for persons with access rights, or the door systems can be opened via a laser system (chip card reader) Automatically opened to specified personnel with access rights. In addition, this system is responsible for controlling the status of the Rittal Air Conditioner door, handle or fastening pin. The correct password for portal access can be established via HTTP. The listed sensors/actuators/lasers can be driven here. In order to be able to actuate the control unit, each Rittal door system must have at least one access sensor and a lock (e.g. handle).
Control keys for identification and setting of sensors/actuators
LED light-emitting diode alarm display used to display alarms or setting changes
Fixed installation of DK7320.440 or DK7320.450
Input, used to access sensors, handles
Lock system 1 (see table)
Input, used to access sensors, handles
l6 PC bus, reader RJ45 for Rittal Air Conditioner door systems 1 and 2, connected via connecting cable DK7320.470
On PUllDK7320.100 (this unit can also be powered by the mains with this connection method)
Further reading
Rittal cabinet、Rittal enclosures、Rittal Air Conditioner、Rittal electric cabinet
Quick navigation
rittal cooling,rittal busbar, rittal fan,rittal electric cabinet ,rittal fan and filter,rittal air conditioner,rittal lock,rittal panel lock,rittal enclosures,Cabinet factory,Chinese cabinet factory,Chinese sheet metal factory,Cabinet customization,china Rittal,china Rittal cabinet,china Rittal Air Conditioning