VX IT,19" mounting angles,standard,front,glazed door,WHD:800x1200x1000mm,24U.
Sheet steel
Aluminium
Glazed door: Single-pane safety glass,3mm
Enclosure frame: Dipcoat-primed
Interior installation: Spray-finished
Rear door and roof: Dipcoat-primed, powder-coated
Front door: Aluminium, anodised/spray-finished
■ Rittal enclosures Colour
Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
Interior installation, vent grille at the front: RAL 9005
Handle and hinges: RAL 9005
VX enclosure frame with doors and roof plate
Glazed aluminium door at the front, 180° hinges
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
Mounting angles, 482.6 mm (19")
Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.
12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)
25 multi-tooth screws, conductive (supplied loose)
IPPC pallet
Roof plate, multi-piece, with horizontal cable entry at the rear and prepared for fan mounting plate
Sheet steel rear door, solid, vertically divided, 180°hinges
Width: 800mm
Height: 1200mm
Depth: 1000mm
24U
87mm/193mm
front
720mm
on depth stays,screw-fastened at the top and bottom.
Standard
multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
482.6mm (19") mounting angles,standard in the VX IT
Open
front
1500N
Depending on how and where it is sited,the door opening angle may vary for selected applications
Sheet steel
Sheet steel door,vented,vertically divided,180°hinges
Aluminium/sheet steel door,vented,one-piece,180°hinges
Packs of
1 pc(s).
Weight/pack
87.4kg