Rittal enclosures Analog Sensor Input Module This input Rittal cabinet module allows individual external analog sensors (4-20mA) to be connected to the input/output sensor unit -Rittal Cabinet Electric Cabinet Rittal Air Conditioning Rittal Fan Rittal PDU Rittal busbar

                      author：Rittal cabinet, rittal cooling        

key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet

Rittal enclosures analog sensor input module
This Rittal control cabinet input module enables individual external analog sensors (4-20mA) to be connected to the input/output sensor unit. As middleware, it assumes
the label distribution function so that foreign sensors can be automatically identified and set by CMC-TC.
Rittal cabinet sensors can be connected to a signal output of up to 4-20mA and a 24v DC operating voltage (maximum 50mA). Here, theRittal electric cabinet CMC-TC
provides an integrated power supply.
The connection to the sensor unit is made via the supplied connecting cable.
Technical Description:
Analog input: 4-20mA, maximum current output of the module at 24V DC: 50mA
Sensor connection without GND is also possible: RJ12 socket, 6-pole
Cable for connection to Rittal enclosures: 2 m long, RJ12 connector, 6/6 bilateral Sensor connection: pull-out terminal block, 3-pole
Digital sensor input module
This Rittal cabinet input module allows individual external digital sensors to be connected to a sensor unit. As middleware, it assumes the label distribution
function so that foreign sensors can be automatically identified and set by CMC-TC. External sensors and transmitters must have a potential-free contact (on or off), as
this - the module supplies the internal power supply. The connection to the Rittal enclosures sensor unit is via the supplied connecting cable in conjunction with the
access unit. This input module allows any door opening system (e.g. transponder) to be connected to a potential-free relay contact.
Operable in input
"NormalyOpen" or
"NormalyClosed".
Technical Description:
Conditions for Rittal electric cabinet execution units: cosphi=1 Maximum load of switch contacts:
1A, 30V DC and 0.5A, 48V AC Maximum switching voltage: 48V AC: 48V DC Maximum switching current: 1A
Maximum current interruption capacity: 3ow.62.5VA
Minimum switching current: 1mA at 5v DC Connection: RJ12 socket, 6 pole
Connection cable: 2 m long, RJ12 connector, 6/6 bilateral Sensor connection: pull-out terminal block, 3-pole