Computer room Rittal cabinet door output module The computer room Rittal enclosures door output module can switch and control the external door opening system through a conversion contact -Rittal cabinet Rittal electrical cabinet Rittal air conditioner Rittal fan Rittal PDU Rittal busbar

                      author：Rittal cabinet, rittal cooling        

key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet

Rittal enclosures sensor detects vandalism
The sensor for monitoring vandalism in Rittal electric cabinet contains a site-independent signaling contact as well as a marking signal, which enables it to be automatically recognized and set by the CMC-TC system.
The connections to the input and output sensor units of the Rittal cabinet are made via the supplied connecting cables.
The sensitivity of the sensor can be set using the unit PUII software.
Rittal Air Conditioner technical description:
Mercury-free contacts, immune to environmental influences
Connection: RJ12 socket, 6 pole
Connection cable: 2m long, RJ12 connector, 6/6 bilateral
Computer room Rittal electric cabinet door output module
The computer room Rittal enclosures door output module can control the switch of the external door opening system through a conversion contact. As an intermediate relay, it assumes the functions of label distribution and withdrawal, so that an opening device can be automatically recognized and set by the CMC-TC system.
The connection to the access unit is made via the supplied connecting cable. On the output side, this module has a plug-in terminal block for connecting the actuator unit cables to the Rittal control cabinet.The power supply for the door opening device must be provided externally.
Rittal Air Conditioner technical description:
Conditions for execution unit: when cosphi=1
Maximum load of switching contacts:
1A, 30V DC and 0.5A, 48V AC
Maximum switching voltage: 48V AC: 48V DC
Maximum switching current: 1A
Rittal Air Conditioner maximum shut-off capacity:
30W, 62.5VA
Minimum switching current: 1mA at 5V DC
Connection: RJ12 socket, 6 pole
Connection cable: 2m long, RJ12 connector,
6/6 bilateral
Rittal cabinet sensor connection: pull-out terminal block, 3-pole
Rittal Air Conditioner notes:
Each output module always requires an access sensor DK7320530.