Rittal enclosures comfort handle with key function This handle has Rittal cabinet door lock and handle lever monitoring function -Rittal electric cabinet Rittal air conditioner Rittal fan Rittal PDU Rittal busbar
Source: edited by this website
Author:stationmaster
3/28/2024
67
author:Rittal cabinet, rittal cooling
key word:Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
This Rittal electric cabinet handle has door lock and handle lever monitoring functions. Key means independence from the control system. This type of handle can always be opened with a key. The handle is supplied with a half-round lock (safety lock 3524E), or a DIN18254 standard half-round lock with a total length of 40 mm can be used. Each Rittal cabinet handle must have an access sensor (DK7320530) fixed to the corresponding door.
If the handle lever of the Rittal enclosures is closed, the locking structure integrated in the handle is automatically locked. The handle can be opened via the CMC-TC system or via optional additional systems such as a contact magnetic card reader. There is no voltage when the handle is locked (no electrical connection). After the electricity is connected, the button can be pressed to release the handle lever, and the door must be opened within 15 seconds.
Priority is always given to unlocking with the key, which means that the Rittal cabinet can be opened with the key whether it is electrically locked or in the event of a power outage (emergency opening).
Rated voltage: 24V DC Rated current: maximum 100mA
Connection cable: 3m long. RJ12 connector
Connection cable: 2m long. RJ12/RJ12 connector for extended coupling: RJ12/RJ12 socket
Temperature usage range: +5°C to +40°c
Also required:
Access sensor DK7320530
Ergoform-S handle with electromagnetic lock
Rittal electric cabinet locking units consist of a Rittal handle system that locks the handle electromagnetically. It contains an identification signal that enables it to be automatically recognized and set by the CMC-TC system. The power input and data exchange on the access unit takes place via the connected connecting cable. Door monitoring always requires an access sensor (DK7320530). Once the door is closed and the handle is locked, the lock can be activated by turning on the lock magnet. The CMC-TC pulls out the handle by closing the locking magnet so the door can be opened. The command to unlock a Rittal enclosures door can be initiated via an access unit, such as a card reader, a contactless magnetic card reader, a combination lock and/or a network management system. The controller system also includes a controller monitor. If the handle is not pushed in and locked after the door is closed, the CMC-TC will send out an alarm signal.
The push button assembly supplied can also be replaced with a safety lock cylinder.
Remark:
An additional cutout is always required.
Additional cutout for electronic locks (PS/FR/QRVR/TC/TE)
Rated voltage: 24V DC Rated current: maximum 100mA
Connection cable: 3m long, RJ12 connector
Rittal electric cabinet connecting cable: 2 m long. RJ12/RJ12 connector for extended coupling: RJ12/RJ12 socket Temperature range of use: +5°C to +40°C
IP40
Also required:
Access sensor DK7320530.
Further reading
Rittal cabinet、Rittal enclosures、Rittal Air Conditioner、Rittal electric cabinet
Quick navigation
rittal cooling,rittal busbar, rittal fan,rittal electric cabinet ,rittal fan and filter,rittal air conditioner,rittal lock,rittal panel lock,rittal enclosures,Cabinet factory,Chinese cabinet factory,Chinese sheet metal factory,Cabinet customization,china Rittal,china Rittal cabinet,china Rittal Air Conditioning