Air/water heat exchanger for hygiene-critical production zones in the food and beverage industry – the optimum addition to the Rittal Hygienic Design range. The cleaning-friendly design reduces the risk of contamination and ensures food safety.
Easy-to-clean, hygienic design
A roof tilt of 30° prevents objects from being deposited on it, and allows liquids to run off quickly
All-round external, replaceable silicone seal prevents the accumulation of dirt between the enclosure and the air/water heat exchanger.
Enclosure: Stainless steel 1.4301 (AISI 304)
Enclosure: Brushed, grain 400, peak-to-valley height < 0.8 μm
Fully wired ready for connection
Sealing and assembly parts
L 35 W 10 at 200 l/h: 1 kW
L 35 W 10 at 400 l/h: 1.2 kW
230 V, 1~, 50 Hz/60 Hz
At 50 Hz: 77 W
At 60 Hz: 104 W
At 50 Hz: 0.38 A
At 60 Hz: 0.47 A
1 ‐ 10 bar
100 %
Water (see Internet for specifications)
1 °C...30 °C
G ⅜" external thread
Thermostat-controlled magnetic valve
Internal thermostat, with change-over contact, switching load 16 A, setting range +20 °C ... +60 °C (factory setting +35 °C)
1 °C...70 °C
To achieve a protection category of IP 66/69 to IEC 60 529, the ingress of leakage air through the condensate discharge opening must be completely prevented.
Width: 215 mm
Height: 982 mm
Depth: 100 mm
Miniature circuit-breaker/fuse: 4 A
20 °C...60 °C
IP 56/59
NEMA 4X