author：Rittal cabinet, rittal cooling
key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
Rittal bus system RiLine60 bus system connection adapter
key word：Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
Rittal bus system RiLine60 bus system connection adapter
Connect Rittal cabinet adapter: because in the bus system, the copper bar is not connected with holes. Therefore, when the external copper bar or cable is connected to the copper bar of Rittal bus system, Rittal electric cabinet is required.
No matter how large the current is, the installation of copper bar, flat bar or special-shaped bar of any specification is universal.
The model selection shall comply with the current specification requirements. Also note:
The outlet form of Rittal cabinet is divided into upper/lower outlet (both upper and lower) and lower outlet (only lower outlet);
Pay attention to whether the wiring area matches the actual connecting copper bar or cable to be used
(Pay attention to the thickness/width of the connecting copper bar and the diameter of the cable);
The 800A adapter has two specifications: one-body type and Rittal electric cabinet split type. The split type means that three phases can be installed independently and there can be a gap between them.
Sometimes if the switch width is larger than the adapter, adjust and install the adapter so that their connection points are in a straight line, so that the copper bar is not connected
Transverse bending for easy connection.
Try not to choose 600A. It is recommended to use 800A directly.
Rittal bus system
RiLine60 Rittal bus system cover plate
Cover plate: used to cover the exposed copper bar insulation in Rittal bus system.
There are two types: buckle to the bottom groove
It is applicable to flat row or PLS special-shaped row of Rittal air conditioner, and the model is sample. Therefore, the selection only needs to be based on the length.
Generally, it needs to be cut according to the actual width of the cover.
If the cover plate is cut too narrow, there will be a little lack of strength,
Rittal air conditioner may fall during transportation and vibration. At this time, it is recommended to use support shutters to strengthen:
Model SV9340220, 5 pieces/bag
Remark: For the above two schemes, we prefer to use the scheme of integral bottom slot and cover plate, which makes the insulation more thorough.
Quick navigation
Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet
Online QQ