In order to obtain the mentioned short-circuit resistance strength, Rittal bus clamp shall be installed at an interval of 300mm
Source: edited by this website
Author:stationmaster
1/24/2023
317
Model: SV9676.002/SV9676.020
120mm Rittal bus center distance,
For bus 40x10 – 60x10mm,
Rittal electric cabinet configuration: 2, 3 and 4 buses for each Rittal bus bracket
Rated working voltage: up to 690V AC
Rated insulation voltage: 1000V AC
Rated pulse voltage: 8kV
Overvoltage category: IV
Pollution degree: 3
Rated frequency: 50/60Hz
Inspection performed by Rittal cabinet:
– Rated peak withstand current Ipk
– Rated short-time withstand current Icw
Flat-PLS100 Rittal bus support 1-4 poles
Model: SV9676.004/SV9676.021
165mm bus center distance,
For Rittal cabinet bus 80x10 – 100x10mm,
Configuration: 2, 3 and 4 buses per bus bracket
Rated working voltage: up to 690V AC
Rated insulation voltage: 1000V AC
Rated pulse voltage: 8kV
Overvoltage category: IV
Pollution degree: 3
Rated frequency: 50/60Hz
Detection performed:
– Rated peak withstand current Ipk
– Rated short-time withstand current Icw
Rittal air conditioning bus fixing clip
Model: SV9676.017/SV9676.019
Supplementary information of Flat-PLS short-circuit resistance strength diagram
Installation spacing of Rittal bus clamp:
In order to obtain the mentioned short circuit resistance strength of Rittal air conditioner, the bus clamp shall be installed at an interval of 300mm. If there are bus supports, contacts or longitudinal connectors within this 300mm interval, the fixing clips may not be used at this position.
Quick navigation
Rittal cabinet, rittal cooling, rittal busbar, rittal fan, rittal electric cabinet